|
Ok, here's the info I need. Send me an
e-mail with Your name, location (just state is fine), up to 5 photos 800X600 in resolution along with a
description of your mods, including year, make and model,
1/4 or 1/8 mile times and or Dyno results (A picture will be nice
for proof). Send
them to: dtoll2002@yahoo.com
.
Starting to post rides so send me your info.
Here's the first one. Welcome Ross with his kick ass Turbo Neon.
Don't you love it??
__________________________________________________
Las Vegas, Nevada
First Ride listed is Ross and his Neon. Mods
are: srt-4 turbo, mopar blow off valve, no cat,
pacesetter exhaust, walboro fuelpump, front and sides prothane
inserts, afx bobble strut(solid), MSD digital DSI-2. MSD coil,
MSD wires, Procharger Digital FMU, underdrive pully,turbo xs
boost controller, missing link map sensor, indy intake manifold,8
inch intercooler, custom intercooler piping, booger bushings, b
and m short shifter, no AC. (click on
the image for the actual size)
Coolidge, Arizona
Damian Lopez's Wicked Neon! Going Turbo!
Mods Are:
Engine and
Exhaust, Mopar Pcm, AFX 55mm Tb, Extrude Honed Intake
Manifold(port matched to Tb), MSD Coil Pack , Crane 8.5mm
Firewires, Pacesetter Header, High Flow Cat
Thermal Muffler,
NGK Plugs, Eclipse Valve Cover, AEM Air Intake(Not Pictured
Took Off Due To Rainy Monsoon Season Lost An Engine Last
Year!!), Vitor's EGR Block Off Plate
Drive Train:
SPEC Stage 2
Modular Clutch, Phantom Grip LSD, Phantom Grip
Diff Saver Pin, Mopar Short Shifter, Booger Bushings, Mopar
Performance Bobble Strut, Prothane Motor Mount Inserts
Fuel System:
Walbro 255 LPH High Flow Fuel Pump
Suspension:
Sprint 1.75" Drop Springs, Monroe Sensa-Trac Struts, Rims
and Tires, 16x7 Konig Theory, Falken 205/40 R16, BFG Drag
Radials Mounted on Different Set Of Konig's(Race Only!!!)
Audio and
Interior: Alpine CD, Jl Audio VR 6x9, Jl Audio XR 5" Componet
Set, 97 Neon Gauge Cluster W/Tach, window tint 5% qtr and
back window, 15% full front windowshield and doors
At The Track:
Mid To Low 15 Sec Quarter Mile Times At Firebird Raceway
Phoenix,Az
Update!: Damian added a Hauns Turbo system
to his car!
(click on
the image for the actual size)
__________________________________________________________________________ Sasktoon, Saskatchewan Canada
Shauns Custom Turbo Neon Ride, Pretty sweet!
Mods Are:
Wings West body kit, 17" adr rims, Autometer gauges and custom
paint. The engine is well built with clevit 77 main and rod
bearings, meilings oil pump, Eagle Rods, JE Pistons, Total Seal
rings, AEM cam gears, Crane Cams, Crane springs and retainers, PT
Cruiser lifters and rollers, Accel Injectors, 1st Gen. Talon
intercooler that he'll mod and put in a front mount this winter,
Battery is located in the trunk and relocated p/s to drivers
side. (click on
the image for the actual size)
Pennsville, NJ. Alex
Comerford
Just getting started! Welcome to the addictive
state of modding!
Mods Are:
18" TSW Sting Wheels and a Custom intake. More mods coming soon. (click on
the image for the actual size)
Montreal Quebec, Canada JF Sam
Awesome looking ride!
98 neon dohc custom body kit pearless paint i did all the
body by myself, shaved everything, got a tv DVD, custom fiberglass sub boxes
(Click on the image for the actual size)
Juan Pablo Zanelatto, Turbo from Brazil!
this is a Neon Dodge with forged
engine 2.2 with turbine 50.63.. twirling in alcool.. wheel with
1kgcm3... this relieving around 380cv..
(Click on the image for the actual size)
Lehighton, PA. Check
out this Turbo charged Neon from Chris. The engine
is bored 20 over with JE 8.1-1 comp. pistons, eagle h beam rods.
crane nitrous cams and valve springs, ported and polished head
and intake, 55mm throttle body, Fidanza cam gears,and forward
motion enforcer turbo and the megasquirt. (Click on the image for the actual size) 
|
